Explosion-proof Enclosures
These powder coated, copper-free capped elbows are applicable for situations that need Class I, Division 1 & 2, Groups C, D; Class II, Division 1 & 2, Groups E, F, G; Class III explosion-proof, corrosion and impact resistant enclosures.
These enclosures are UL approved, CSA and FM certified or approved. The smooth integral bushings prevent damage to wires.
| SPECTEC P/N | ENCLOSURES |
| 90010-001 | Killark Y1 elbow enclosure for the Models 4013 and 4023 signal conditioners. The two ½ - 14 NPT female openings allow one for a conduit mount sensor and the second for the conduit. |
| 90010-003 | Killark Y3 elbow enclosure for Model 4016 and 4026 FTV and FTC converters. Openings are 1” NPT. 1” to ½” NPT reducers also available. |
| 90012-001 | Appleton ELBY 50 elbow enclosure for the 4027 FTC and 4028 FTV converters. |
| 90012-002 | Appleton ELBY 75 elbow enclosure |
| 900120-03 | Appleton ELBY 100 elbow enclosure |
Speed Sensor Connectors
SPECTEC offers mil spec connectors for use with its passive and active magnetic speed sensors and proximity sensors. Connector assemblies are available in a variety of lead lengths and end connectors.
| SPECTEC P/N: | 2 Pin Connectors: | |
| 3000-XX2 | MS3102-10SL-4P | mates with MS3106-10SL-4P |
| 3001-XX2 | Bendix, Bayonet MS-3116-F8-2S | mates with MS3113-H8A-2P |
| 3004-XXXX | Micro C, straight or right angle | mates with NEMA 6 or IEC IP 68 watertight connectors |
| 3 Pin Connectors | ||
| 3000-XX3 | MS3102A-10SL-3P | mates with MS3106-10SL-3S |
| 3004-XXXX | Micro C, straight or right angle | mates with NEMA 6 or IEC IP 68 watertight connectors |
| 4 Pin Connectors | ||
| 3000-XX4 | MS3102A-12SL-844P | mates with MS3106 |
| 3001-XX4 | Bendix, Bayonet MS-3116-F8-4S | mates with MS3113-H8A-4P |
| 5 & 6 Pin Connectors | ||
| 3004-XXXX | Micro C 5 or 6 pin, straight or right angle | meets NEMA 6 or IEC IP 68 watertight connectors |
| 3001-XX6 | Bendix, Bayonet MS-3116-F10-63 | mates with MS3111-H10A-6P |
Lock Nuts
SPECTEC offers stainless steel jamnuts for all the popular magnetic sensor and RF pickup thread sizes.
| SPECTEC P/N: | LOCKNUTS: |
| 10038-004 | ¼ - 28 UNF-2B locknut |
| 10038-009 | 5/8 - 18 UNF-2B locknut |
| 10038-013 | 11/16-24 UNEF-2B locknut |
| 10038-015 | ¾ - 16 UNF-2B locknut |