SPECTEC's Model 4100 Universal DC Power Supply provides a stable DC power supply that is suitable for a wide range of sensors and signal conditioners. The DC power supply is housed in a rugged water-proof and dust-proof NEMA 4 box, making it useful in most environments exposed to the weather.
This DC power supply is strong enough to energize two signal conditioners with a PC mounting board that can accommodate either a single or dual preamp. Adjustable and special DC output voltages are also available upon request.
Screw terminals are provided for AC input power connections of either 120Vac or 240Vac. The PC board is predrilled to accommodate the wide selection of SPECTEC amplifiers and signal conditioners.
The power supply enclosure is injection molded, glass-filled polycarbonate with knockouts in the bottom for line feeds. The EDPM cover gasket assures a water-tight and dust-tight seal.
Power Supply Characteristics:
| AC Input: | 120Vac, 25 mA 240Vac, 12 mA |
| DC Output: | Option 1: 5Vdc, 5%, 100mA Option 2: 12Vdc, 5%, 50mA Option 3: 24Vdc, 5%, 25mA |
| Dimension: | 5.12" x 3.75" x 2.24" |
| Standards: | NEMA 4, 12 and 13, CE Enclosure flammability rating: UL94-V0 IEC 529, IP66 Polycarbonate |
| Optional Interfaces: | Cable glands (SPECTEC P/N 90028-XX) 2 and 3 pin MS-3102A series connectors (mates to MS-3106A) 3 pin MS-3102A and PT02A-10-6P series connectors Special connectors per customer request |
ISO 9001:2008 registered.