DIGISPEC RF Pickups - Digital Flow Meter Sensors Specifications

Download Spectec's printable DIGISPEC RF Pickup Speed Sensors Spec Sheest (PDF format):

DIGISPEC RF pickups are active sensors driven by an internal RF (modulate carrier) signal conditioner. The digital output of this flowmeter sensors is directly proportional to a ferrous or aluminum target passing the pickup coil. The square wave output is designed for computing and/or further processing. DIGISPEC RF pickups have EMI protection and reverse polarity protection.

DIGISPEC RF flow meter sensors are available in open face design for greater sensitivity or closed face design for greater environmental sealing.

Custom digital RF pickup sensors or OEM replacement speed sensors available. An internal temperature probe (NTC10, RTD100 or others) is available which is positioned near the face of the sensor.

Contact Spectec's engineering and design team for full details- or complete and submit our online Digital RF Flow Meter Sensor Information Request Form.

Please contact Spectec for detailed specification sheets for each DIGISPEC RF pickup and flow meter sensor listed.

DIGISPEC Flow Meter Sensor Specifications RF Pickup Sensors With Integral Amplifier - Digital RF Flowmeter Sensors
Supply Voltage (Vs): Pulse Out (Vo): Frequency Range: Air Gap: Temp. Ranges:		7 - 30 Vdc @ 15 mA 0 - Vs, 0 - 5V (TTL), 0 - 10 V, Open Collector (NPN or PNP) 0.5 Hz - 5 kHz (Std) 0.03" Typical; 0.50" Max. depending on target mass & velocity. 2TE: -40° to 220° F (-40° to 120° C) 3TE: -40° to 290° F (-40° to 145° C)
5/8   M16	Thread Size: Length (L):	5/8-18 UNF, M16x1.5 2.5" to 10" (64 to 250 mm)
11/16	Thread Size: Length (L):	11/16-24 2.1" to 3.5" (54 to 90 mm) Also hex head sensors
3/4  M18	Thread Size: Length (L):	3/4-16, 3/4-20, M18x1.5 2.1" to 10" (54 to 250 mm)