Magnetic speed sensors manufacturing

Hall Effect Gear Position Sensors Specifications - Gear Tooth Sensors

Download Spectec Hall Effect Gear Position Sensors Spec Sheet (PDF format) or the individual model spec sheets below.

SPECTEC's Hall effect gear position sensors are designed to switch in the presence of a ferrous target, such as gear teeth or blade tips. Gear teeth as small as module 0.5" wide or 48DP can be sensed. Standard output is provided from a 2.2kOhm internal pull-down resistor to a collector, which can sink 25 mA. Open collector or source output can be provided. Short circuit and reverse voltage protection is available.

Integrated temperature probe (RTD or NTC) magnetic Hall effect sensors are available.

Contact Spectec for custom Hall effect gear position speed sensors or OEM replacement speed sensors - or complete and submit our online Information Request Form.

Hall Effect Gear Position Sensor Specifications

Zero Speed Sensors - Gear Tooth Hall Effect Speed Sensors

               
Supply Voltage (Vs):
Pulse Out (Vo):
Frequency Range:
Air Gap:
Temp. Ranges:
 4.0 - 30 Vdc @ 18 mA
 0 - Vs, 0 - 5V (TTL), 0 - 10 V, Open Collector (NPN or PNP)
 0 Hz - 20 kHz depending on target size and distance
 0.05" Typical; 0.25" Max. depending on target and speed.
 2TE: -40° to 221° F (-40° to 105° C)
 3TE: -40° to 300° F (-40° to 150° C)

 1/4, M6, M8 Sensors: Model 0165

  Download 0165 Sensors Specs

Thread Length:
Thread Sizes:
Smooth Shell Dia.:
Temp Range:

1.0" to 3" (25 - 76 mm)
1/4-40 UNS, 1/4-28 UNF, M6, M8
1/4", 5/16"
2TE or 3TE


Hall effect gear tooth sensors
Hall effect gear tooth sensors

 3/8, M10 Sensors: Models 0166/0167

Download 0166/0167 Sensors Specs

Thread Length:
Thread Sizes:
Smooth Shell Dia.:
Temp Range:

0.8" to 6" (20 to 152 mm)
3/8-24 UNEF, M10
3/8" dia.
2TE or 3TE

 
Hall effect gear position sensors

 1/2, M12 Sensors: Model 0168

Download 0168 Sensors Specs

Thread Length:
Thread Sizes:
Smooth Shell Dia.:
Temp Range:

1.0" to 6" (25 to 152 mm)
1/2-20 UNF, 1/2-32 UN, M12
1/2" dia.
2TE or 3TE


Hall effect gear tooth sensors
Hall effect speed sensor

 5/8, M16 Sensors: Models 0169/0170

Download 0169/0170 Sensors Specs

Thread Length:
Thread Sizes:
Smooth Shell Dia.:
Temp Range:

1.1" to 6" (28 to 152 mm)
5/8-18 UNF, M16
5/8" dia.
2TE or 3TE

Available in Dual Output

Hall effect gear sensor

 3/4, M18 Sensors: Models 0171/0172

Download 0171/0172 Sensors Specs

Thread Length:
Thread Sizes:
Smooth Shell Dia.:
Temp Range:

1.0" to 6" (25 to 152 mm)
3/4-16 UNF. 3/4-20 UNEF, M18
3/4" dia.
2TE or 3TE

Available in Dual Output

zero speed gear position sensors