Intrinsically Safe Hall Effect Linear Position Sensors Specifications

Download Spectec's printable Intrinsically Safe Hall Effect Linear Position Sensors Spec Sheet (PDF format):

Intrinsically Safe Hall linear and angular position sensors are a derivative or our standard hall effect position sensors and are certified by FM Global to meet requirements of Class I, Zone 0, AEx [ia] IIC, Class I, II, III, Division 1, Group ABCDEFG.

CAUTION: These sensors MUST be installed with an FM Global approved IS barrier. Installations must meet the requirements of intrinsically safe systems for hazardous (classified) locations and must follow details specified in FM Global control drawing 85047.

Intrinsically Safe DIGISPEC Hall Effect Linear Position sensors are designed to detect continuous variations in the magnetic field and convert field strength to a proportional voltage. The output voltage produced for zero field is nominally 2.5v, with a standard transfer function of +/- 10 mV/Gauss. Magnetic sensitivity is along one axis only. Several units can be combined to measure (X, Y, Z) magnetic field vectors.

Custom ranges, output configurations, sensitivity and packaging of Hall effect linear position sensors or OEM replacement sensors available.

Contact Spectec's engineering and design team for full details - or complete and submit our online Intrinsically Safe Position Sensor Information Request Form.

Please contact Spectec for detailed specification sheets for each Intrinsically Safe Hall effect linear or angular position sensor listed.

Intrinsically Safe Hall Effect Linear Position Sensor Specifications IS Zero Speed Sensors - Intrinsically Safe Hall Effect Angular Position Sensors                 Supply Voltage (Vs): Pulse Out (Vo): Frequency Range: Sensing Distance: Temperature Ranges: 8 - 30 Vdc @ 5 mA 0.06 – 4.95 V typical 0 Hz - 30 kHz 0.00" to 1.00" (@ 3000 Gauss typical) 2TE: -40° to 220° F (-40° to 120° C) 3TE: -40° to 300° F (-40° to 150° C)   5/8   M16 Thread Size: Length (L): 5/8-18, M16x.5 2.1" to 10" (54 to 250 mm)   3/4   M18 Thread Size: Length (L): 3/4-20, M18x1.5 2.1" to 10" (54 to 250 mm)